PostPro SFX. Vapor smoothing that fits on a bench.
PostPro SFX is AMT's desktop vapor smoothing system for R&D and low-volume production: a 190 × 320 × 190 mm chamber, an automated cycle of up to 2 h and FA5802 (Pure) chemistry, on single-phase power with no external extraction.
Need a bigger chamber? PostPro SF2XCompare all four
The originals of automated vapor smoothing · patented process 250+ SFX installations worldwide ·
- Chamber W × D × H
- 190 × 320 × 190 mm
- Cycle
- up to 2 h
- Machine W × D × H
- 450 × 500 × 845 mm
- Power
- Single-phase, 230 V or 120 V
One cycle, start to finish.
Parts go into the front-loading chamber on processing racks. The SFX then runs conditioning, processing, curing and drying in one automated cycle. Consumable loads from Safe-Pour cartridges, with a quick-change recovery cartridge in the machine.
- 01
Conditioning
Parts are conditioned in the chamber to reach the right processing conditions.
- 02
Processing
Vaporized consumable is injected into the chamber and smooths part surfaces under controlled conditions.
- 03
Curing
The consumable is removed from the surface and the surface resolidifies.
- 04
Drying
Parts are dried so no consumable remains in the chamber, ready for use.
Cycle
up to 2 h
One automated cycle, from as-printed to finished.
Materials
- Printers
- MJF, SLS, SAF, HSS; FDM (Ultem, Onyx)
-
FA5802 (Pure)
On the SFX: 31 tested grades from 14 makers · SLS, MJF, SAF, FDM
Nylon and TPU parts from powder-bed printers, Ultem and Onyx parts from FDM. Works in SFX · SF2X · SF50 · SF100.
-
FA9202 Polypropylene
On the SFX: 4 polypropylene grades · SLS, MJF, SAF
Dedicated consumable for finishing polypropylene parts. Works in SFX · SF50 · SF100.
Safety data and documents: consumables page.
Results, and who runs an SFX.
SGD 3D, a print service in Nottingham, on adding vapor smoothing with the PostPro SFX.
How SGD 3D Scaled Production with Vapor Smoothing | PostPro SFX in Action Length 1:14
Best published results
- Finish 13.42 → 1.18 µm Surface roughness
- Strength up to +38% Elongation at break
- Accuracy ≤ 0.4% Dimensional change
- Sealing up to +7% Burst pressure
Results depend on the material and finishing agent used.
Point Designs: Partial hand prostheses HP MJF → PostPro SFX: Smooth, sealed surfaces that improve comfort and hygiene. Case study, .
Atlantic Clinic for Upper Limb Prosthetics: “Vapor smoothing addresses these challenges by creating a sealed, low-friction surface that enhances comfort, improves hygiene, and increases resistance to wear and staining.” Case study, ; it does not name the machine model.
Measure your bench.
The SFX stands 845 mm tall on a 450 × 500 mm footprint and weighs 82 kg. A machine stand is optional.
- Power
- 230 V single-phase, 16 A or 13 A (UK) · 120 V single-phase, 15 A (US)
- Extraction
- No external extraction system required
- Touchscreen
- 7-inch touchscreen
- Connectivity
- Wi-Fi
- Consumable
- Safe-Pour consumable cartridges
- Recovery
- Quick-change recovery cartridge
- Stand
- Machine stand optional (Complete configuration)
PostPro SFX key specifications
| Specification | Metric | US |
|---|---|---|
| Chamber (W × D × H) | 190 × 320 × 190 mm7.5 × 12.6 × 7.5 in | 7.5 × 12.6 × 7.5 in |
| Chamber volume | 11.5 L | |
| External size (W × D × H) | 450 × 500 × 845 mm17.7 × 19.7 × 33.3 in | 17.7 × 19.7 × 33.3 in |
| Weight | 82 kg181 lb | 181 lb |
| Power | 230 V single-phase, 16 A or 13 A (UK) · 120 V single-phase, 15 A (US) | |
| Cycle | up to 2 h | |
| Finishing agents | FA5802 (Pure) · FA9202 | |
| Print processes | MJF, SLS, SAF, HSS; FDM (Ultem, Onyx) |
Everything else is in the full spec sheet. For anything not listed, talk to an engineer.
Recipes, portal and support.
The SFX runs from a 7-inch touchscreen with Wi-Fi. Recipes, portal access and service cover are options, each priced in your quotation.
- Recipes
- PostPro SFX FLEX - Single Recipe Profile · PostPro SFX FLEX - Advanced Recipe Package
- Portal
- PostPro Portal Access: Access to the PostPro SFX online portal for installation, training onboarding & self service needs
- Support
- SFX-traCare service and maintenance cover, in one-, two- or three-year terms: Care packs
Where it starts.
PostPro SFX · from
$22,900
Starting price, excluding tax and shipping. The SFX is sold as the Starter or the Complete Bundle, and your quotation prices the one you choose.
| PostPro SFX - The Starter Bundle: Includes PostPro SFX, 3 x Processing Racks, Storage Stand, 1 x FA5802 Cartridges, 2 x Air Filters · 1 Year Warranty | Priced in your quotation |
|---|---|
| PostPro SFX - The Complete Bundle: Includes PostPro SFX system, Machine Stand, 6 x Processing Racks, Storage Stand, Preparation Stand, 3 x FA5802 Cartridges, 6 x Air Filters · 24-Month Warranty | Priced in your quotation |
Care packs, consumables, filters and services are quoted with your system. See consumables
Care packs: SFX-traCare
- SFX-traCare
- Extends service and maintenance cover for the PostPro SFX beyond the standard warranty.
- Terms: 1, 2 or 3 years. Priced in your quotation, with the plan details. Request a quote
Paying monthly (US and Canada)
In the US and Canada, the SFX is offered on a monthly plan that includes the system, the FLEX software license, Pure consumables, and full-service support and maintenance. PostPro SFX monthly plan (US and Canada)
What would it cost per part? Open the ROI calculator
Questions about the PostPro SFX.
What is the PostPro SFX?
The PostPro SFX is AMT's desktop vapor smoothing system for R&D and low-volume production. It seals and smooths 3D printed polymer parts in a 190 × 320 × 190 mm chamber, in an automated cycle of up to 2 h, with FA5802 (Pure).
How much does the PostPro SFX cost?
The SFX starts from the price shown in the Price chapter on this page, excluding tax and shipping. It is sold as two bundles, the Starter Bundle and the Complete Bundle, with a machine stand and a preparation stand; your quotation prices the one you choose. In the US and Canada, the SFX is also offered on a monthly plan. PostPro SFX monthly plan (US and Canada)
What warranty comes with the SFX?
The Starter bundle includes 12 months manufacturer's warranty, and the Complete bundle 24 months manufacturer's warranty. SFX-traCare extends service and maintenance cover beyond the warranty, for one, two or three years: see care packs (priced in your quotation).
Which materials and printers does it work with?
PA12, PA11 and TPU with FA5802 (Pure), Polypropylene (PP) with FA9202, and FDM parts in Ultem and Onyx. Printing processes: MJF, SLS, SAF, HSS; FDM (Ultem, Onyx). Not on the list? Send a part to the free benchmark.
What does the SFX need to run?
A bench for a 450 × 500 mm footprint and 82 kg, and single-phase power: 230 V single-phase, 16 A or 13 A (UK) · 120 V single-phase, 15 A (US). No external extraction system is required.
How long does a cycle take?
up to 2 h for the full automated cycle of conditioning, processing, curing and drying.
Should I choose the SFX or the SF2X?
Both run the same process, with the same Pure chemistry and the same automated cycle of up to 2 h. The SF2X has a 260 × 390 × 260 mm chamber, double the SFX capacity. PostPro SF2X
Can I test my parts before I buy?
Yes. Send parts to the free benchmark and they come back vapor smoothed with before-and-after photos and a report: No cost to evaluate · Parts returned · Typical turnaround 2–3 weeks.
Send us a part. We’ll send it back vapor smoothed.
Submit your parts online and ship them with a prepaid label. We vapor smooth them and send them back with before-and-after photos and a full benchmark report.
Test your parts, free Request a quote
No cost to evaluate · Parts returned · Typical turnaround 2–3 weeks
Help me chooseCalculate ROITalk to an engineerFind a partner near you
Your parts arrive, as printed
Hung on the rack
Into the smoothing chamber
Back to you, vapor smoothed
