Materials · Polypropylene
Vapor smoothing polypropylene (PP) parts.
Polypropylene vapor smoothing reflows the rough surface of a 3D printed PP part into a smoother, closed skin. Polypropylene resists the agents that smooth nylon, so PostPro uses a dedicated one: FA9202. PostPro systems smooth PP printed by MJF, SLS and SAF.
No cost to evaluate · Parts returned · Typical turnaround 2–3 weeks

- Applications
- Fluid parts, clips and housings
- Processes
- MJF · SLS · SAF
- Finishing agent
- FA9202
- Systems
- SFX, SF50, SF100
Why PP is different
Chemically resistant, so it needs its own agent.
Polypropylene is light, tough and resistant to many chemicals, which is why it is printed for fluid parts, clips and housings. The same resistance means an agent tuned for nylon will not smooth it.
A dedicated agent
Dedicated consumable for finishing polypropylene parts: FA9202, listed for the SFX, SF50, SF100.
A closed, cleanable surface
Reflowing the surface closes the open texture of printed PP, so parts are easier to clean and look finished.
Published on two PP powders
AMT has published vapor smoothing whitepapers on BASF Ultrasint PP and on Ricoh PP printed by SLS.
Same four-stage cycle
Conditioning, processing, curing and drying, as for every PostPro material.
Agents and systems
Which machine runs FA9202.
Polypropylene from MJF, SLS and SAF runs with FA9202. AMT lists FA9202 for the SFX, SF50 and SF100.
| Process | Material | FA5802 (Pure) | FA326 | FA9202 |
|---|---|---|---|---|
| MJF | Polypropylene | Not listed | Not listed | Listed |
| SLS | Polypropylene | Not listed | Not listed | Listed |
| SAF | Polypropylene | Not listed | Not listed | Listed |
Listed by AMT— Not listedFA5802 (Pure) runs in every PostPro system; FA326 (High performance) on the SF50 and SF100; FA9202 for Polypropylene (PP).
- SFXDesktopPP listed
- SF2XDesktop, double chamberNot listed
- SF50IndustrialPP listed
- SF100Industrial, high volumePP listed
Each PostPro product page lists its materials.
Material not listed for your system? Send us a part and we will test it. Test your parts, free
BASF Ultrasint PP whitepaper Ricoh PP whitepaper PostPro consumables
Can polypropylene 3D prints be vapor smoothed?
Yes. Polypropylene printed by MJF, SLS and SAF is vapor smoothed on PostPro systems with the dedicated FA9202 agent.
Which consumable is used for PP?
FA9202. Dedicated consumable for finishing polypropylene parts.
Which PostPro machines run FA9202?
AMT lists FA9202 for the SFX, SF50, SF100. Confirm the configuration for your machine with AMT, especially for the SFX and SF2X.
Why can’t PP use the same agent as nylon?
Polypropylene resists the agents that smooth nylon and other polar plastics, so it needs an agent chosen for it.
Next step
See the price. Run the numbers. Hold the part.
Starting prices are public and the cost-per-part math is yours to check, with no email needed for either. The free benchmark puts your own parts, vapor smoothed, in your hands.
-
01Quote
Build your quote
Pick a system and its options, and send AMT an itemized quotation request. Each system shows its starting price.
-
02ROI
Calculate your ROI
Compare your cost per part with manual finishing, using your own labor rate and volumes. Every assumption is editable.
-
03Benchmark
Test your parts, free
Ship us your parts with a prepaid label. We vapor smooth them and send them back with before-and-after photos and a benchmark report.
No cost to evaluate · Parts returned · Typical turnaround 2–3 weeks
Prices: starting prices, excluding tax and shipping; everything else is priced in your quotation.
Not sure which system? Help me choose