Learn · SAF and HSS

Vapor smoothing for SAF and HSS parts.

Vapor smoothing finishes Selective Absorption Fusion (SAF) and High Speed Sintering (HSS) parts the way it finishes other powder-bed parts: a controlled vapor reflows the porous surface into a smoother, sealed skin. SAF PA12 and HSS PA11 and PA12 run with FA5802 (Pure) or FA326, and PA11 parts from SAF are vapor smoothed too.

No cost to evaluate · Parts returned · Typical turnaround 2–3 weeks

A gloved hand loads printed parts on a rack into the chamber of a PostPro SFX
Stratasys’ SAF team vapor smooths production parts on a PostPro SFX. Watch the film (opens YouTube in a new tab)

Published results

What vapor smoothing does to SAF and HSS parts.

Two powder-bed processes that fuse with infrared energy, both producing nylon parts with the porous surface vapor smoothing closes. These are the best results AMT has published for them. Results depend on the material and finishing agent used.

  • Surface roughness

    12.81 → 4.16 µm (XY)

    As printed to vapor smoothed

  • Dimensional change

    ≤ 0.4%

    After vapor smoothing

  • Elongation at break

    +34% (XY) · +103% (ZX)

    Against as-printed parts

  • Impact strength

    +33% (XY) · +62% (ZX)

    Unnotched, against as-printed parts

Published studies

SAF and HSS parts, tested.

The two whitepapers behind these results, each with its method and full data.

  • Cover of the whitepaper on vapor smoothing Stratasys SAF parts

    Stratasys SAFWhitepaper

    Vapor smoothing SAF parts: process insights

    Surface, impact strength and dimensions of SAF PA12 parts vapor smoothed with FA5802 (Pure).

  • Cover of the whitepaper on vapor smoothing voxeljet HSS PA12

    voxeljet HSSWhitepaper

    Vapor smoothing HSS PA12

    Roughness, elongation at break and dimensional change on vapor-smoothed HSS PA12 parts.

Materials and systems

Which agent, which PostPro.

SAF PA12 and HSS PA11 and PA12 run with FA5802 (Pure) or FA326 (High performance). Size the system by volume and part size: the desktop SFX and SF2X, or the industrial SF50 and SF100.

SAF and HSS materials by finishing agent
SAF and HSS materials by finishing agent
ProcessMaterialFA5802 (Pure)FA326FA9202
SAFPA 12ListedListedNot listed
HSSPA 11, PA 12ListedListedNot listed

Listed by AMT— Not listedFA5802 (Pure) runs in every PostPro system; FA326 (High performance) on the SF50 and SF100; FA9202 for polypropylene.

Questions

SAF and HSS vapor smoothing: questions.

Short answers. Anything else, ask an engineer.

Can SAF parts be vapor smoothed?

Yes. SAF PA12 is listed with FA5802 (Pure) and FA326, and AMT has published process insights on vapor smoothing SAF parts with FA5802 (Pure). PA11 parts from SAF are vapor smoothed too.

How much do HSS PA12 parts change dimensionally?

In AMT’s published test on voxeljet HSS PA12, dimensional change was ≤ 0.4%.

Which finishing agent is used for SAF and HSS parts?

FA5802 (Pure) or FA326 (High performance), for SAF PA12 and for HSS PA11 and PA12. FA326 runs on the SF50 and SF100.

Next step

See the price. Run the numbers. Hold the part.

Starting prices are public and the cost-per-part math is yours to check, with no email needed for either. The free benchmark puts your own parts, vapor smoothed, in your hands.

  1. 01Quote

    Build your quote

    Pick a system and its options, and send AMT an itemized quotation request. Each system shows its starting price.

    Build your quote

  2. 02ROI

    Calculate your ROI

    Compare your cost per part with manual finishing, using your own labor rate and volumes. Every assumption is editable.

    Calculate ROI

  3. 03Benchmark

    Test your parts, free

    Ship us your parts with a prepaid label. We vapor smooth them and send them back with before-and-after photos and a benchmark report.

    Test your parts, free

    No cost to evaluate · Parts returned · Typical turnaround 2–3 weeks

Prices: starting prices, excluding tax and shipping; everything else is priced in your quotation.

Not sure which system? Help me choose